International Workshop on Integrated Power Packaging (IWIPP) Offering Free Corridor Webinar Series

July 12, 2021

Press Release

International Workshop on Integrated Power Packaging (IWIPP)  Offering Free Corridor Webinar Series
Photo Courtesy of PSMA

Limited registration is now open for free three-day event, August 23, 25 and 27, 2021; “Corridor Webinar” intended to bridge gap between 2019 and 2022 workshops   

MENDHAM, NJ—June 25, 2021—The Power Sources Manufacturers Association and IEEE Societies — Power Electronics (PELS), Electronic Packaging (EPS), and Dielectrics and Electrical Insultation (DEIS) — are sponsoring a free webinar series taking place over three days in the last week in August, 2021. The webinar series is a corridor event made possible by the financial support of the sponsors with the intention of bridging the gap from the 2019 IWIPP workshop to the 2022 IWIPP workshop. 

The IWIPP (IWIPP) corridor webinar series will consist of three (3) webinar sessions, each lasting two-and-a-half (2.5) hours. Each session will address a different set of applications and technology advances. The sessions will be on Monday, August 23rd, Wednesday, August 25th, and Friday, August 27th. Each session will begin at 7:00 a.m. CDT (2:00 p.m. CEST). There will be three presentations per session. Each presentation will be approximately twenty-five minutes in length. There will be a panel-style question-and-answer session at the end of each webinar event. Each webinar session will remain open until the presenters answer all the questions submitted. The program for the webinar events can be found at: Full Program – IWIPP.

Registration for the corridor webinar is now open at: Registration – IWIPP. The webinar series will be free of charge but the number of attendees that can register will be limited. 

“Attendees have always recognized the IWIPP Workshop as a high-value event that brings together global academic and industry experts to formally and informally discuss issues to advance and productize packaging, materials, and system technologies,” said Prof. Francesco Iannuzzo, PhD., Aalborg University and Chair for the 2022 Workshop and the 2021 Corridor Webinar. “The 2021 webinar series will fill a void in the timing of the live workshop series created by the COVID-19 pandemic by providing exciting updates on power modules, power packaging and materials.”

Registered attendees for the workshop will have access to the presentations prior to the webinar series. This will allow attendees across global time zones to conveniently access the presentations in advance and submit questions. Recordings of the presentations and panel Q&As also will be made available to registered attendees after the webinar series is completed.

For more information about previous and upcoming IWIPP events, visit the IWIPP website.

About PSMA

PSMA is a non-profit professional organization with the objective of enhancing the stature and reputation of its members and their products, and improvement of their technological power sources knowledge. Its aim is to educate the entire electronics industry, academia, government and industry agencies as to the applications and importance of all types of power sources and conversion devices. 
 
Editorial Contact:
Power Sources Manufacturers Association  
Joe Horzepa, Executive Director   
973.543.9660 • 973.543.6207 (FAX)  
[email protected]       

Media Contact:
WelComm, Inc.
Greg Evans, CEO
858. 279.2100 • 858.633.1911 (Direct)
[email protected]

Featured Companies