TEWS TECHNOLOGIES Launches mPCIe Module with User-Programmable FPGA, AD/DA and Digital I/O
July 17, 2017
TEWS TECHNOLOGIES announced today a standard full PCI Express Mini Card with a user programmable Kintex-7 FPGA, AD/DA, and digital I/O channels. The TMPE627 is designed for industrial, COTS, and...
TEWS TECHNOLOGIES announced today a standard full PCI Express Mini Card with a user programmable Kintex-7 FPGA, AD/DA, and digital I/O channels.
The TMPE627 is designed for industrial, COTS, and transportation applications, where specialized I/O or long-term availability is required. It provides a number of advantages including a customizable interface for unique customer applications and a FPGA-based design for long-term product lifecycle management.
The TMPE627 provides 14 ESD-protected 5 V-tolerant TTL lines. All I/O lines are individually programmable as input or output. TTL I/O lines can be set to high, low, or tristate. Each TTL I/O line has a pull-resistor to a common programmable pull-up voltage that can be set so +3.3 V, +5 V and GND.
The 16-bit ADC offers 4 input channels that can be software configured to operate in single-ended or differential mode. It offers software selectable input voltage ranges of 0-5.12 V, 0-10 V, 0-10.24 V, ±5 V, ±5.12 V, ±10 V and ±10.24 V with a sampling rate of up to 200 ksps.
The DAC offers 4 channels of 16-bit analog outputs with software selectable output voltage ranges of 0-5 V, 0-10 V, 0-10.8 V, ±5 V, ±10 V or ±10.8 V. The output voltage range can be individually set per channel. The conversion time is typical 10 μs and the DAC outputs are capable to drive a load of 2 kΩ, with a capacitance up to 4000 pF.
Each TMPE627 is factory calibrated. The calibration information is stored in an on-board serial EEPROM unique to each TMPE627 module.
The I/O signals are accessible through a 30 pin Pico-Clasp latching connector.
The User FPGA is configured by a SPI flash. An in-circuit debugging option is available via a JTAG header for read back and real-time debugging of the FPGA design (using the Vivado ILA). With the TA308 Programming Kit direct JTAG access to the FPGA is possible, using the Xilinx Platform Cable USB.
User applications for the TMPE627 with 7A50T FPGA can be developed using the design software Vivado Design Suite HL WebPACK Edition, which can be downloaded free of charge from www.xilinx.com.
TEWS offers a well-documented basic FPGA Example Application design. It includes a constraints file with all necessary pin assignments and basic timing constraints. The example design covers the main functionalities of the TMPE627. It implements PCIe to register mapping and basic I/O. It comes as a Xilinx Vivado Design Suite project with source code and as a ready-to-download bit stream.
In order to support long term programs, the TEWS’ modules have a 5 year warranty.
About TEWS TECHNOLOGIES
TEWS TECHNOLOGIES is a leading solutions provider of embedded I/O and CPU products based on open architecture standards such as PMC, XMC, IndustryPack® (IP), CompactPCI, standard PCI, PCIe, mPCIe, AMC, FMC, and VME. TEWS has more than 30 years of experience designing and building turn-key embedded interface solutions using the philosophy to listen and respond to our customers’ needs. Using this ‘customer first’ approach, TEWS has developed a large number of standard and custom products for industrial control, telecommunication infrastructure, medical equipment, traffic control and COTS applications. TEWS’ line of embedded I/O solutions is available worldwide through a global network of distributors. For more information, go to www.tews.com.